Abus WIRELESS ALARM SYSTEM Istruzioni per gli Interventi Scaricare il pdf (Pagina 26)

3.2.2 Disarming partitions

1. Select the partition you want to deactivate. Do this by pressing

and

entering the partition number [1/2/3].

2. Enter your user PIN and press

. You hear the following announcement:

“{System / [partition x]} disarmed”.

3. Repeat these steps to deactivate further partitions.

Example:

To deactivate partition 3 with user PIN 1-2-3-4, press the following:

3 1-2-3-4

IMPORTANT:

If the ACTIVE LED flashes following deactivation, check the display for activated

(alarmed) zones.

3.2.3 Disarming under duress / silent alarm

With the ABUS wireless alarm system, you can deactivate the system with a forced

code. If you enter the duress PIN, your alarm system is deactivated as normal, but

simultaneously a silent alarm is triggered. This alarm is transmitted to an emergency

command centre and must therefore never be triggered arbitrarily or accidentally. The

duress PIN is used if you are forced by someone else to deactivate the system.

To use the duress PIN, just add 1 to the last digit of your user PIN (see the examples in

the following table).

User PIN Duress PIN

1-2-3-4 1-2-3-5

5-6-7-8 5-6-7-9

6-7-8-9 6-7-8-0

IMPORTANT:

Never perform a forced deactivation with the duress PIN arbitrarily or for no special

reason. Emergency command centres take this very seriously and act fast!

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Nessun commento

Abus WIRELESS ALARM SYSTEM Istruzioni per gli Interventi Pagina 26