
35
6.3 Creating schedules
Use the scheduler to schedule automatic actions of the ABUS wireless alarm system.
You just define a time at which the system automatically runs one of the following
functions:
• Automatic system activation/deactivation
• Programming a switch output
• Restriction program for users
You can create up to 16 schedules.
To make your settings, use the table in the appendix (section 9.3).
6.3.1 Schedule for automatic system activation/deactivation
The program for automatic system activation/deactivation arms/disarms your system at
times defined by you.
When you create this schedule, you define the following parameters: Partition,
activation mode (external/internal), time (from-to) and schedule name
You can then define two periods a day in which your system is active (armed) or inactive
(disarmed).
While the automatic system activation/deactivation schedule is in operation,
announcements continue to be played. When the countdown begins, the following
message is heard:
“System armed in away” or “System in automatic arming process, please exit
now”.
To set the automatic system activation/deactivation schedule:
1. Under user functions, press [6] for Clocks.
2. Enter your user PIN and press .
3. Select [5] for Scheduler.
4. Select the schedule number (1–16) that you want to enter/edit.
5. Select [1] for arm/disarm.
6. Follow the instructions on the LCD display. These instructions guide you
through the remaining programming steps.
IMPORTANT:
1. If you want to define the same time intervals for every day of the week, select
[8] for All.
2. When defining the partitions you want to activate: Scroll with the
buttons to the desired partition (1,2,3).
3. Press to enter or delete Y.
4. Leave the time at 00:00 if you do not want automatic activation/deactivation
during the current time interval.
Commenti su questo manuale